![]() The Garmin 57 also packs in a parking guard, a live view, and an automatic cloud backup that securely stores your recording in the cloud for safe keeping. It'll also tell you when you're too absent-minded to notice traffic has started moving. It packs in a number of safety features including forward collision warnings, lane departure warnings, and alerts when you're coming up to stop lights and speed cameras. If you don't have a a newer car with driver assistance features, this is where the Garmin 57 shines. The Garmin Dash Cam 57 packs in all the usual dash cam features, as well as a few more that enhance your recording capabilities and smarten up your car in the process. This can be done by navigating through the on-screen menus of the recorder as shown in the next section.If you're looking for solid features at a less stomach churning price, there's Garmin's Dash Cam 57. If a used hard drive is being added, it's a very good idea to format the drive. New hard drives will not need to be formatted once they are installed in the DVR. From here it's as simple as reversing the steps to install the new or additional drive. Once this is complete the hard drive will be able to be removed from the main chassis of the recorder. You will need to remove any screws that are securing it to the mounts inside the recorder. The two cables can remain connected to the main board. Remove these from the hard drive by pushing down the metal tab on each cable and pulling them away from the hard drive. The hard drive will have two cables connected to it: a power cable and a data (SATA) cable. Once inside the unit, the user will be able to see all the inner workings of the DVR/NVR. This applies only to scenarios where you are replacing hard drives. Once this is complete the user needs to remove the screws from the casing to be able to remove the top cover from the recorder. This can be done by flipping the switch on the back of the unit then pulling the cable (by the connector) from the power port. The first step in adding or removing a hard drive in a security camera recorder is to completely power it down and unplug it from the outlet or surge suppressor. ![]() Step 1: Disconnect your video recorder from power The recorder's limited warranty does not cover user incurred damage. Do not use a motorized screwdriver or drill on the unit as it may strip the screws on the recorder and cause incidental damage to the recorder. The steps outline for the videos below should be followed carefully to ensure you do not damage the hard drive or the DVR or NVR.Ĭaution: be sure to have the DVR turned off, and be on a static free surface like a concrete floor when working on the DVR. Installing hard drives inside the recorders can be tricky for the novice user. Sometimes it may be necessary to replace the hard drive inside your surveillance video recorder, or if you don't have a hard drive and would like to install one yourself, the videos below will be helpful. How to install a Hard Drive inside your DVR or NVR
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |